Downlight, tri colour, 10 Watt, Triac Dimming, IC-4, White, SMD down light

TAKE ADVANTAGE OF QUANTITY DISCOUNTS ON THIS PRODUCT

10 Watt giving out 900 lumens makes this light bright and efficient at the same time.

SMD Lights are diffused and have a very wide beam angle. These lights are great when you just want a lot of light in all directions with no beaming issues or dark spots. 

Triac dimmible makes it suitable to use with a standard Clipsal style dimmer as well as more advance home automation dimmers from C BUS, Rako, Control4 and many more. Dimming enables you to control the output and power usage of the lights. We have tested the dimming with traditional dimmers as well as Rako dimmers in our showroom, and it gives a very linear dimming all the way from 12% to 100%. In automation software you could easily align the 12% dimming level with the zero level and rule out any flickering issues. 

Tri-colour selection makes the light suitable for different room installation. You may want to choose the bedrooms and family rooms to be warm white. Whereas, laundry and bathrooms could be natural white. Garage could be set to cool white. If you would like to change, just pull the light out of its cut out and change it to whatever you prefer. 

IP44 rating enables this light to work safely in high moisture areas like shower rooms or outdoor eves. 

A UGR (Unified Glare Rating) of less than 19 makes this light very comfortable to live with and is considered highly suitable for indoor residential and commercial environments. 

IC-4 Compliance means that this light can be installed in direct contact with insulation materials. 

100 degree beam angle is wide enough to ensure good spread of light with no dark spots.  

A flicker free driver means that you will not see any frequency flicker if you were to record a video in its light. A frequency flicker cannot be seen by human eye. Frequency flicker can be seen in recorded video. It makes a video look like its running on a old VCR with a dirty head. 

3 Step Macadam binning means that the LED chip used in the this light is highly colour consistent. You are not going to see variations in the colour temperature output. All lights will display consistent colour and the LED chips are chosen more carefully. 

33 mm installation depth is reasonably low and would suit most modern residential or commercial projects. 

SAA compliance means that there will be no chance of you having any unexpected issues when the local inspectors comes to visit your property to check it for electrical compliance. 

This light fitting comes with Australian plug and 3 years Australian warranty. 

Cutout 83-90 mm  Fitting size : 100 x 33 (H) mm

Click here to download the IC-4 Compliance report for X4E Downlight 

Click here to download the EMC certificate of Conformity for X4E Downlight

Click here to download the installation instructions for X4E Downlight