Free standard shipping to Australia
Next day delivery available on request. Please choose at check out.
Free 30 days returns. No questions asked if product returned in original packaging.
Summary in a glance
2 x 400 pcs x 0.75mm x 5 metres PMMA end lit optic fiber strands harness
12VDC , 10 Watt generator engine
SAA approved power supply , with Australian plug is included.
adjustable rpm to make the twinkle effect more realistic.
3 year warranty
to create a twinkling star ceiling effect
How to do it
You will need to punch 800 x 1 mm holes in your ceiling. Keep your light generator in the middle of the room inside your ceiling. Please make sure you have a 240Volt power supply, preferably connected to a dedicated on/off switch button. Please do not tap into downlight circuit, as you will need to keep your downlights on to be able to run your star ceiling generator. Pass each strand from inside the ceiling into the room every time you punch a hole with a 1 mm drill bit. Once you have covered your entire ceiling with 400 strands, randomly distributed. We recommend you spray paint the ceiling into a dark colour, grey, dark blue or black. Super mat paint is recommended as reflections are not desirable. The spray paint will jam the strands into position. Hot glue can also be used on every strand from inside, but not necessary. Once the strands are jammed into place, (by glue or dried spray paint) Cut all the strands, leaving about a centimeter length showing out of the plaster into the room. Connect the other end of the harness into your generator, and watch your room convert into a beautiful night star ceiling. The generator has a rotating wheel, that makes the ends of the strands twinkle. Please use the adjustments on the generator to decrease or increase the rpm of the rotating wheel to make the twinkle effect more realistic.